| Plate 1: |
Form of hand wheels and hand cranks, and valve identifications |
| Plate 2: |
Symbols used (on drawings and diagrams) |
| Plate 3: |
Color identification of pipe lines, conduits, and tubes |
| Plate 4: |
Abbreviations used (on drawings and legends) |
| Plate 5: |
General arrangement of vessel |
| Plate 6: |
Trimming, compensating and drainage system |
| Plate 7: |
Regulating and compensating system |
| Plate 8: |
Fuel oil venting, sounding and test piping (longitudinal section) |
| Plate 9: |
Fuel oil filling, transfer, and delivery system |
| Plate 10: |
Fuel oil compensating system (circulating water under pressure) |
| Plate 11: |
High pressure air system |
| Plate 12: |
Low pressure or service air system |
| Plate 13: |
Cooling-water system and anti-corrosion oil-circulating system; for ships with Krupp engines |
| Plate 13A: |
Cooling-water system and anti-corrosion oil-circulating system; for ships with MAN engines |
| Plate 13B: |
Cooling-water system and anti-corrosion oil-circulating system; for Submarines U93-U97 |
| Plate 14: |
(Left) Engine lubricating oil system, (Right) lubricating oil storage, sump and purifying system, for Krupp engines |
| Plate 14A: |
(Left) Engine lubricating oil system, (Right) lubricating oil storage, sump and purifying system, for MAN engines |
| Plate 15: |
Engine starting air and induction air (for Krupp engines) |
| Plate 15A: |
Engine starting air and induction air (for MAN engines) |
| Plate 16: |
Flooding, venting, low pressure exhaust gas and emergency blowing systems |
| Plate 17: |
Blowing and emergency blowing systems for ballast, regulating and diving (negative buoyancy) tanks |
| Plate 18: |
Compartment ventilating and supply systems (emergency ventilating) |
| Plate 19: |
Ventilating diagrams for surface, submerged, running and charging conditions |
| Plate 20: |
Oxygen system |
| Plate 21: |
Fresh water, wash water, waste and sanitary systems |
| Plate 22: |
(Left) Evaporating and distilling system; (Right) voice tube system |
| Plate 23: |
Hydraulic system for operating periscopes |
| Plate 24: |
Steam heating system |
| Plate 25: |
Torpedo tube firing, venting, flooding and drainage systems |
| Plate 26: |
Lime-water (acid neutralizing) system (for battery compartments) |
| Plate 27: |
Arrangement of compartments and tanks, and tank capacities |
| Plate 28: |
Flooding and venting system for ballast and buoyancy tanks |
| Plate 29: |
Air starting gear for Krupp engines |
| Plate 29A: |
Air starting gear for MAN engines |
| Plate 30: |
Reversing gear for Krupp engines |
| Plate 30A: |
Reversing gear for MAN engines |
| Plate 31: |
Cross-sectional arrangements |
| Plate 32: |
Specifications for hose and connections for piping systems |
| Plate 33: |
Pumping plan |
| Plate 34 |
Vibration and noise mountings, port and starboard |
